Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!unixhub!slacvm!streater
From: STREATER@SLACVM.SLAC.STANFORD.EDU (415)
Newsgroups: comp.sys.mac.apps
Subject: Re: 4D : Printing irregular sized forms
Message-ID: <91107.222724STREATER@SLACVM.SLAC.STANFORD.EDU>
Date: 18 Apr 91 06:27:24 GMT
References: <9104171436.aa28855@PARIS.ICS.UCI.EDU>
Organization: Stanford Linear Accelerator Center
Lines: 17

In article <9104171436.aa28855@PARIS.ICS.UCI.EDU>, cmacfarl@crimee.ICS.UCI.EDU
(Craig) says:
>
>I need to be able to print data on a preprinted, continuous feed, 11 x 8 1/2
>inch form.  The only paper type in the Page Setup dialog box that handles
>printing wider than 8 1/2 inches is Computer Paper.  Unfortunately, the
>size of the Computer Paper setting is 14 x 11 inches.  Therefore whenever
>a form feed is sent to the printer, it forms feeds halfway down the next
>page.
>
>Is there any way, from 4D, to control the size of the page being printed?
>
I am curious about this too. In my case, I would like, when printing labels, to
be able to tell the printer (Imagewriter), that the paper has *no* size, so
it ceases to skip one label every 10.

Tim.