Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uwm.edu!bionet!agate!usenet.ins.cwru.edu!po.CWRU.Edu!dre2
From: dre2@po.CWRU.Edu (David R. Ernst)
Newsgroups: comp.sys.mac.programmer
Subject: prefered appletalk interface
Message-ID: <1991Apr18.151557.25736@usenet.ins.cwru.edu>
Date: 18 Apr 91 15:15:57 GMT
Sender: news@usenet.ins.cwru.edu
Organization: Case Western Reserve University, Cleveland, Ohio, (USA)
Lines: 27
Nntp-Posting-Host: cwns6.ins.cwru.edu


Hi 
I'm trying to write a THINK Pascal program that deals with
AppleTalk.  Unfortunately, I'm having severe preoblems early
on. This is my first experience with the AppleTalk Manager.

So after doing a lot of reading, I began to input some simple
code. Basically the program was intended to Register itself
using nbp.  Following all the advice I could find, I used
the new 'prefered' interface.  However Inside Mac vol. 5
(which is the only thing I've seen with documentation on it
(and I've Looked too)) is pretty bad on this subject.

Well, the long and short of it is, I run it, and it works,
but if I run it again, the system crashes. Infact, if I run 
it and then try to exit THINK, the system crashes.  Obviously
a problem with memory, right?  

Anyway, that's where I stand now.
Any help would be greatly appreciated.

-- 
"                             [] "I don't know what to say"
                           "  []    
     from lecture on something[]
              ----john cage   []          ----david ernst