Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!wuarchive!udel!haven!mimsy!dftsrv!jagubox.gsfc.nasa.gov!jim
From: jim@jagubox.gsfc.nasa.gov (Jim Jagielski)
Newsgroups: comp.unix.aux
Subject: ELM, job control and signals
Message-ID: <4886@dftsrv.gsfc.nasa.gov>
Date: 15 Apr 91 13:05:12 GMT
Sender: news@dftsrv.gsfc.nasa.gov
Reply-To: jim@jagubox.gsfc.nasa.gov (Jim Jagielski)
Organization: NASA/Goddard Space Flight Center
Lines: 33

Well, I've never really used ELM with job control before but I tried it out to
see if ELM would misbehave. When I did the ^Z ELM told me:

Stopped: Use "fg" to return to ELM.

ksh job control then responded with:

[1] + Stopped (signal)        elm

After about 5 minutes I brought elm back to the front... it said:

Back in ELM. (you might need to explicitly request a redraw)

All worked pretty good...

Anyway, I'm running ELM 2.3 PatchLevel 11 with NO real changes/additions to
the source (i.e., all I did was run Configure)...

Maybe:

	1. You're running an older version
	2. I didn't leave it in the back long enough
	3. My version was compiled under 2.0... maybe something happened
	   from 2.0 to 2.0.1 to change the way it compiles... I'll have to
	   try that.
--
===========================================================================
#include <std/disclaimer.h>
                                 =:^)
           Jim Jagielski                    NASA/GSFC, Code 711.1
     jim@jagubox.gsfc.nasa.gov               Greenbelt, MD 20771

 "I object to all this sex on the television. I mean, I keep falling off!"