Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!cs.uoregon.edu!ogicse!intelhf!ichips!inews!khouglan@pima.intel.com
From: khouglan@pima.intel.com (Kriss Hougland~)
Newsgroups: sci.electronics
Subject: Programing a PAL/GAL/etc.
Keywords: Programming  PAL GAL
Message-ID: <3810@inews.intel.com>
Date: 13 Apr 91 21:51:09 GMT
Sender: news@inews.intel.com
Distribution: na
Organization: intel corporation
Lines: 22

I've seen talk of this subject before, but...

I have looked for information on programming, but I can not find a bit of
information on how the program the things.  I am looking at cutting down my 
part count with a PAL or GAL or PLA or ...
I don't have a programmer for anything besides and Eprom programer.

1) Should I give up all hopes of getting solution #2 or #3 to work?

2) Can I convert my eprom programmer to a more generic programmer?

3) Find plans for a programmer and build one.  (less than a $500 programmer).

Thanks in advance.



--
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Addresses:		!Disclaimer:  All information is my own and is not that
khouglan@hopi.intel.com ! my employer.   "Opportunity came knocking, but I was
askah@acvax.inre.asu.edu!                 in the bathroom."  (ME)