Xref: utzoo comp.multimedia:354 rec.video:19663 sci.electronics:19313 Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!lll-winken!taco!hobbes.catt.ncsu.edu!kdarling From: kdarling@hobbes.catt.ncsu.edu (Kevin Darling) Newsgroups: comp.multimedia,rec.video,sci.electronics Subject: Re: info. needed on converting NTSC to digital YUV Message-ID: <1991Apr15.003507.13170@ncsu.edu> Date: 15 Apr 91 00:35:07 GMT References: <1991Apr14.215547.28061@agate.berkeley.edu> Sender: news@ncsu.edu (USENET News System) Organization: North Carolina State University Lines: 17 anantha@arches.berkeley.edu (Anantha Chandrakasan) writes: >I am designing a real-time video compression board that >needs a converter from a standard composite NTSC signal or >S-Video signal to digital YUV (640x480 pixels) signal. > >I would appreciate if anybody can provide information on >chips that I can use to design such converter. I am >already aware of the Philips chip set (8702, 7191 etc.), >but its poor documentation is proving to be a bottleneck. >I was wondering if there are any other chip sets around >that will let me implement the above. There's also supposed to be a Digital Television Evaluation Module (DTEM) from Philips which uses those chips, and at least the schematics in the docs for it might be helpful... or perhaps even the board itself. Luck! - kevin