Xref: utzoo sci.electronics:19394 comp.robotics:817
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!deccrl!news.crl.dec.com!shlump.nac.dec.com!sousa.ltn.dec.com!sndpit.enet.dec.com!smith
From: smith@sndpit.enet.dec.com (Willie Smith)
Newsgroups: sci.electronics,comp.robotics
Subject: Re: Pressure sensitive plastic
Message-ID: <1086@sousa.ltn.dec.com>
Date: 17 Apr 91 20:20:48 GMT
Sender: newsa@sousa.ltn.dec.com
Organization: Digital Equipment Corporation
Lines: 24


In article <14978@life.ai.mit.edu>, 
	bellutta@ai.mit.edu (Paolo Bellutta) writes...
>I need to find the makers of those pressure sensitive sandwiches which

I can't reply by Email, as you didn't provide an Internet adress, but I got 
a sample of a pressure sensitive resistor the other day from a company 
called:

	Interlink Electronics
	PO Box 40760
	Santa Barbara, CA 93013
	(805) 684-2100
	Fax (805) 684-8282

The sample is rather interesting, it's a 3/4-inch square pressure sensitive 
resistor bonded into a flex circuit and printed up to resemble a business 
card!  Works rather well too...  There is an Interlink in Europe somewhere, 
but that information isn't on the card.

Willie Smith
smith@sndpit.enet.dec.com
smith%sndpit.enet.dec.com@decwrl.dec.com
{Usenet!Backbone}!decwrl!sndpit.enet.dec.com!smith