Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uunet!comp.vuw.ac.nz!martin From: Martin.Scharnke@comp.vuw.ac.nz (Martin Scharnke) Newsgroups: comp.dcom.modems Subject: Falcon 2400bps modem Keywords: modem help Message-ID: <1991Apr22.022305.1013@comp.vuw.ac.nz> Date: 22 Apr 91 02:23:05 GMT Sender: news@comp.vuw.ac.nz (News Admin) Reply-To: martin@comp.vuw.ac.nz (Martin Scharnke) Organization: Dept. of Comp. Sci., Victoria Uni. of Wellington, New Zealand. Lines: 41 Nntp-Posting-Host: lyall.comp.vuw.ac.nz Originator: martin@lyall.comp.vuw.ac.nz Can any reader please help me... I have a Falcon (proudly made in the US) 2400 modem which I purchase 10 months or so ago. 3 month warranty expired, and the shop I purchased from is just an importer. Of late it's been giving me some trouble: * On the rare occasions that DTR assertion actually brings on the Terminal Ready light on the modem these days, it only performs correctly for a short period of time (say 5 minutes). * Most of the time, the DTR light on the modem just stays off. A hard reset of the modem (and my PC) doesn't help. * I managed to get the modem doctor software from a friend, which told me that everything was fine except my modem. * I have used 3 different cables, which all used to work just fine, now none do. I have noticed that all the silion is actually made in Aisa (Taiwan I think :-{ ) So - can anybody say they've had exerience with this brand of modem, and can anybody help me? I don't read this newsgroup, so perhaps you could e-mail me if you can help? Thanks in anticipation: _ || martin@comp.vuw.ac.nz ' )--,--, _/_ || Victoria University / / / __ __ / . _ || Wellington, New Zealand / / (_(_/|_/ (_(_(_/ ) || -- _ || martin@comp.vuw.ac.nz ' )--,--, _/_ || Victoria University / / / __ __ / . _ || Wellington, New Zealand / / (_(_/|_/ (_(_(_/ ) || martin@actrix.co.nz