Xref: utzoo comp.sys.ibm.pc.hardware:7933 comp.sys.ibm.pc.misc:8906 comp.dcom.modems:9367 Path: utzoo!utgpu!news-server.csri.toronto.edu!torsqnt!jtsv16!blister!beltrix!peters Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc,comp.dcom.modems Subject: Re: ZOFAX 96/24 Keywords: Fax Modem board From: peters@beltrix.UUCP (Peter Sleggs) Message-ID: References: <3374@kluge.fiu.edu> Date: Mon, 22 Apr 91 13:10:37 EDT Organization: Bellatrix Systems Mississauga, ONT Canada hentsche@serss0.fiu.edu (Erich Hentschel) writes: > Zoltrix Product: > > The following product appears to have caused some damage to > my 386SX. I have not been able to contact the company and > no one seems to have ever heard from them. what have you tried ?? as they do not have an address or phone # ANYWHERE on the package I dont think they WANT to hear from end users, I deal withthe local distributor for all problems. I believe that one of the PC mags had a review of the board in the last few months one *should* be able to get a phone # from the article (if you cant find the article mail me I'll try and find it here) > > The main problem, (so far) seems to be that I can no longer > format 2D 3 1/2 diskettes in the high drive. High density This should have NO effect, what happens if you remove the card?? > Any suggestions, on how to determine > what has happened to the dirve > would be greatly welcomed. The drive probably has failed for an unrelated reason, as the only reason I can see for the FAX interfering would be a defective floppy disk clobbering the drive. You never mentioned if the modem of FAX works ? does it? if so there is most likely some unrelated reason for the floppy problem. I use the Zoltriz fax board in my main development system and so far the ONLY complaint I have is the dammed bitfax software:-(, it is Desqview HOSTILE and I have to shud down DV to send a fax. good luck peter {blister|torag|skypod}!beltrix!peters or peters@torag.uucp OR as a last resort lsuc!canrem!peter.sleggs