Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!unmvax!ddnvx1.afwl.af.mil!sadler
From: sadler@ddnvx1.afwl.af.mil
Newsgroups: comp.misc
Subject: Numbers needed for Priam ID-100 Drive
Message-ID: <1991Apr19.180507.22000@ddnvx1.afwl.af.mil>
Date: 19 Apr 91 18:05:07 GMT
Organization: Phillips Laboratory - Kirtland AFB
Lines: 20

I need some numbers for a Priam ID-100RC for a fussy installation.  I have
the numbers in the manual, but it seems that I need the following as well:

Precomp
Landing Zone

I can probably guess the Landing Zone, since the drive has 1156 cylinders
and 7 heads (and 25 sectors per track).  If anybody has the numbers for
write reduce, or ecc I would like them as well.  (I tried calling Priam,
but it seems that they've gone belly-up.  The recording at their old
number gave another number for Priam Systems tech support, but the person
who answered the phone said nobody there could help me!)

E-mail answers are preferred, since this is probably of limited interest.

Thanks, 
Joe Sadler
sadler@ddnvx1.afwl.af.mil
Disclaimer:  I speak for nobody but myself.  All opinions are probably
mine, but that's only an opinion too.