Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!munnari.oz.au!yoyo.aarnet.edu.au!sirius.ucs.adelaide.edu.au!levels!etpkg
From: etpkg@levels.sait.edu.au
Newsgroups: comp.os.cpm
Subject: Help: Tandon Disk Drive & Xebek controller
Message-ID: <16222.280f1c59@levels.sait.edu.au>
Date: 19 Apr 91 07:05:36 GMT
Organization: University of South Australia
Lines: 17


Help! I have an ICL model 35 computer running MP/M ver. 2.4f3. Recently
the hard disk died ( it was a 10 meg Rodime model RO 200 ) and I got
hold of second hand 5 meg Tandon model TM 501 to replace it. However it
doesn't work. I suspect I need to change the jumper settings on the drive.
So, If someone has details of the jumpers of the Tandon drive they would be
much apreciated. The hard disk controller in the ICL is a Xebek Systems
model 104526 (at least thats the only number written on it). The jumper
settings for this would also be good.

I can be contacted at paul@sal.sait.edu.au or you can post it to the 
newgroup.

Thanks in advance, 

Paul Gray
University of South Australia.