Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!emory!ogicse!cvedc!mcspdx!adphdw20!dtb From: dtb@adpplz.UUCP (Tom Beach) Newsgroups: comp.periphs.scsi Subject: Re: HELP: Seagate ST157N-1 error code... Summary: SCSI error codes Keywords: Seagate wanted help ST157N-1 Message-ID: <691@adphdw20.UUCP> Date: 23 Apr 91 17:27:18 GMT References: <1283@idcapd.idca.tds.philips.nl> <11853@jarthur.Claremont.EDU> Organization: ADP Dealer Services R&D, Portland, OR Lines: 40 > I get sense codes every once in a blue moon, usually right after I tell my > friends I never have problems with my HD. I'm using a Seagate 157N, I think. > It's a 48.8 meg mechanism with ICD host adaptor and software. What are > sense $17 and $15 errors. I think those are the only two I've had. Can I > get a listing of sense errors? Who would I write to, ICD, Seagate, or the > babooze who I bought the HD from and might have neglected to give me the > info? SCSI ERROR CODES: 01 No index/Adress mark found 02 No seek complete 03 Write Fault 04 Drive not ready 08 Logical Unit Communication failure 09 Track following error 10 ID CRC or ECC error 11 Unrecovered read error 12 No address mark in ID field 14 No record found 15 Seek positioning error 17 Read error recovered with retrys 18 Read error recovered with ECC 19 Default List error 1A Parameter overrun 1C Primary defect list not found 1D Compare Error These were taken from a Seagate manual for a drive different from yours. Most of them are defined by the SCSI spec so should be standard for all drives which support them. All drives do not support all error codes. Tom ------------------------------------------------------------------------ | Tom Beach : Sr Project Engineer : Mass Storage Technology | | phone : (503) 294-1541 | | email : uunet : dtb@adpplz.uucp | | ADP Dealer Services, ADP Plaza, 2525 S.W. 1st Ave, Portland OR, 97201 | ------------------------------------------------------------------------