Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!know!sdd.hp.com!caen!ox.com!math.fu-berlin.de!fub!einoed!buchonia.rhoen.in-berlin.de!fulmin!!insider!hupka
From: hupka@insider.zer.sub.org
Newsgroups: comp.sys.amiga.hardware
Subject: re: Re: A2091/A2630 incompatiblity
Message-ID: <9104171311.07.2460@INSIDER>
Date: 19 Apr 91 03:05:49 GMT
Sender: news@buchonia.rhoen.in-berlin.de (News Administration)
Distribution: comp
Organization: fulmin Ebersburg/Rhoen
Lines: 28


  
> >The machine gurued a few seconds after booting, without any external
> >cause. Both A2091 and A2630 work properley independet, or together in
> >other machines (4.x boards)
> I would look for another cause, I've been running 2091/2630 for a long time
> with no problems at all. Have you got extra memory on the 2091 or 2630?

I've heard that the same combination and THE SAME boards correctly run with a different
A2000... The A2091 has 2MB extra memory on board; the system crashes
although it is disavled.

The A2630 has 4MB RAM on board; the system seems to crash with 2 and 4MB. However,
it seemed to run with 32bit-RAM disabled.

Currently I am running the 2630 with a different controller (ALF-3)
and everything is pretty fine. An Advantage 2000 worked correctly, too.

> Perhaps there is a bad chip? Do you have any non-CBM programs running? Is
> your power supply up to snuff?

The crash's are absolutely software indipendet; both 1.3 and 2.0 lead
to india. Anyway, I stopped the machine right after booting 1.3 without
*ANY* program being run - CRASH.

Olli

%/% o.wagner, auf dem stein 5, 3441 weissenborn, germoney