Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!uwm.edu!psuvax1!rutgers!aramis.rutgers.edu!remus.rutgers.edu!papp
From: papp@remus.rutgers.edu (papp)
Newsgroups: comp.sys.amiga.hardware
Subject: Help! I need PALS grounded!?
Keywords: A1000, 2 expansion devices!
Message-ID: <Apr.21.23.20.24.1991.9584@remus.rutgers.edu>
Date: 22 Apr 91 03:20:24 GMT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 15


I just got an Expansion Technologies Zorro I expansion box with a 2
meg card, and a CLtd. SCSI interface, both for the Amiga 1000.  Both
devices work properly by themselves, but in combination, the Amiga
doesn't manage to get much further than loading up Kickstart.... I
have often read about problems like this being caused by PALs not
being grounded.... So, my question is, can I do this myself?  If so,
does anyone have instructions on how to do this?  Are instruction
available in a file on some FTP site?  Any help would be greatly
appreciated.

Thanks,
-Al

papp@remus.rutgers.edu