Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!ut-emx!ccwf.cc.utexas.edu
From: drxmann@ccwf.cc.utexas.edu (Dustin Christmann)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: GVP 2 Boot
Message-ID: <47693@ut-emx.uucp>
Date: 23 Apr 91 05:26:46 GMT
References: <9104221650.AA20431@alessia.dei.unipd.it>
Sender: news@ut-emx.uucp
Reply-To: drxmann@ccwf.cc.utexas.edu (Dustin Christmann)
Organization: The University of Texas at Austin
Lines: 20

In article <9104221650.AA20431@alessia.dei.unipd.it> gigio@ALESSIA.DEI.UNIPD.IT (GianLuigi Nusca) writes:
>
>
>	I have noticed that GVP 2 hd controller takes about 15
>seconds from amiga reset to the beginning of the boot.
>	Is this true? If so, can someone explain me why?
>
>				gigio@alessia.dei.unipd.it

I noticed this as well when I got my GVP Series II and it perplexed me, but if
you turn to the technical stuff in the back of the manual, it explains that the
card is scanning every SCSI device.



-- 
Thanx,					Internet: drxmann@ccwf.cc.utexas.edu
Dustin R. Christmann			Bitnet: DRXMANN@UTXVM

[ Disclaimer or quote under construction. Thank you for your patience.]