Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!rutgers!ucsd!mvb.saic.com!dayton.saic.com!afitamy!f210.n110.z1.FIDONET.ORG!Eric.Sanders
From: Eric.Sanders@f210.n110.z1.FIDONET.ORG (Eric Sanders)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: HELP!  AMIGA won't boot with new Fujitsu d
Message-ID: <427.281140AF@afitamy.fidonet.org>
Date: 21 Apr 91 04:48:20 GMT
Sender: ufgate@afitamy.fidonet.org (newsout1.26)
Organization: FidoNet node 1:110/210 - Starchaser BBS, Dayton OH
Lines: 18

AREA:UUCP_HRDWR
Hi Dave,  I had a problem with my Fujitsu 90 meg drive and a Hardframe 
controller.  I found out it had to do with the jumper that controlled 
whether it was in syncronous our asynchronous mode.  I can't remember 
exactly which was correct but I believe it had to be in asyncronous mode.
My spre sheet shows a string of jumpers with 11 pins called CNH-1.  To 
put it in asyncronous mode, pin 5&6 need to be jumpered (11 is nearest 
the edge of the board, one towards the middle).

Hope this helps (1.2 Gig Geesh! Lucky Duck!)


--  
----------------------------------------------------------------------------
AFIT Amiga Users BBS/UFGateway |Eric Sanders - via FidoNet node 1:110/300
    1:110/300 Dayton, Ohio     |UUCP: afitamy!210!Eric.Sanders
        (513)-252-7681         |ARPA: Eric.Sanders@f210.n110.z1.FIDONET.ORG
----------------------------------------------------------------------------