Newsgroups: comp.sys.amiga.hardware Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!unlinfo.unl.edu!typhoon!bills From: bills@typhoon.unl.edu () Subject: Re: (was RAMSEY) 2nd SCSI controller Message-ID: Sender: news@unlinfo.unl.edu Nntp-Posting-Host: typhoon.unl.edu Organization: University of Nebraska - Lincoln References: <1991Apr12.002442.3871@minyos.xx.rmit.oz.au> <1991Apr23.010944.10776@ariel.unm.edu> <20874@cbmvax.commodore.com> <41588@cup.portal.com> Date: 24 Apr 91 00:23:14 GMT Lines: 17 FelineGrace@cup.portal.com (Dana B Bourgeois) writes: >Dave, I haven't seen anyone ask this before. Can you run more than one >SCSI controller in an Amiga? If so, is there any special setup to do to >make it work? (over and above the usual stuff) >Dana bourgeois @ cup.portal.com You most certainly can. A friend of mine wanted some of my picture files I had but the data would have taken 25+ floppies. Instead of backing up the files on floppy, I simply took out my 2091 card (with hard drive mounted on it) and placed it in my friends machine. The only thing to take note of is if both cards have bootable partitions on them, the one closest to the processor will boot. - Trent Bills