Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ucselx!bionet!agate!usenet.ins.cwru.edu!ysub!psuvm!dxb132
From: DXB132@psuvm.psu.edu
Newsgroups: comp.sys.amiga.misc
Subject: Re: ICD Flicker Fixer
Message-ID: <91109.213320DXB132@psuvm.psu.edu>
Date: 20 Apr 91 01:33:20 GMT
References: <178.280BE812@weyr.FIDONET.ORG> <6515@bwdls58.bnr.ca>
Organization: Penn State University
Lines: 16

In article <6515@bwdls58.bnr.ca>, dbscoop2@bwdlh417.BNR.CA (Alun Fryer) says:

>Well, I haven't actually *SEEN* one running BUT, I can tell you a few things:

>Using a "standard" VGA monitor is not a good idea because it is a
>single-frequency  monitor, which means you cannot use PAL mode (with the
>one meg Agnus).   If you get a "Super" VGA (SVGA) monitor, you will be
>able to use PAL (since SVGA monitors will adjust to different frequency

Is this really true? I thought VGA monitors were supposed to handle
50Hz - 70Hz refresh rates (all with a 31Khz horiz. scan rate of course).
A friend of mine uses his Seiko VGA monitor in PAL (and NTSC) with no
problems. (on a 2320/A3000)
I recently aquired a 2320 so I'm quite interested in all views....

-- Dan Babcock