Xref: utzoo comp.sys.apollo:8847 comp.mail.elm:4021
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!mcsun!ukc!mucs!liv-cs!liv!qq11
From: QQ11@LIVERPOOL.AC.UK (Alan Thew)
Newsgroups: comp.sys.apollo,comp.mail.elm
Subject: Re: vi from within elm
Message-ID: <91112.124911QQ11@LIVERPOOL.AC.UK>
Date: 22 Apr 91 11:49:11 GMT
References: <1991Apr18.175202.1760@fwhnm02.fwrdc.rtsg.mot.com>
Organization: University of Liverpool
Lines: 21

In article <1991Apr18.175202.1760@fwhnm02.fwrdc.rtsg.mot.com>,
mmuegel@fwhnm02.fwrdc.rtsg.mot.com (Mike Muegel) says:
>
>I think I remember this being discussed before but I can find no record of it
>in my saved articles. We are having a problem when trying to use vi inside of
>elm when dialing in to an Apollo. vi works fine outside of elm. However,
>when started from within elm the following error message is printed by vi:
>
>   Missing lhs
>
>When we rlogin to the SAME host and then run elm/vi we do NOT get the error
>message......

Sounds like a TERM setting problem to me. How does vi work outside of
elm when your rlogin or telnet?

Alan Thew  : University of Liverpool Computer Laboratory
Bitnet/Earn: QQ11@LIVERPOOL.AC.UK or QQ11%UK.AC.LIVERPOOL @ UKACRL
    UUCP   :           ....!mcsun!ukc!liv!qq11
   Voice   :  +44 51 794 3735        FAX : +44 51 794 3759
Internet   : QQ11@LIVERPOOL.AC.UK or QQ11%LIVERPOOL.AC.UK @ NSFNET-RELAY.AC.UK