Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!ucbvax!gnh-starport.cts.com!whitewolf From: whitewolf@gnh-starport.cts.com (Tae Song) Newsgroups: comp.sys.apple2 Subject: Re: 56k Super Serial Card Message-ID: Date: 20 Apr 91 02:30:44 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: The Internet Lines: 20 X-Unparsable-Date: Fri Apr 19 91 at 07:54:47 (EDT) |A back issue of Computer Shopper Mag. had an article on how to make your |Super Serial Card run at greater than 56k baud. I was wondering if anyone |has kept a copy of this article and would be willing for forward it to me. |I've checked the local libraries to no avail. The article was written by |Don Lancaster (Apple // Guru). | |The reason I'm looking for this, is that I recently purchased a USRobotics |Dual Standard Modem and would like to be able to transmit data to it as |fast as it can accept it (38.4k). As far as I know, the SSC can only |achieve 19.2k baud. | |Thanks, I have the article and I think I have all the stuff typed in (schematics, texts driver, I think)... I might have deleted them. About the SSC, you could make it go faster but, you'd have to write the INET: whitewolf@gnh-starport.cts.com UUCP: crash!gnh-starport!whitewolf ARPA: crash!gnh-starport!whitewolf@nosc.mil