Path: utzoo!utdoe!generic!pnet91!sb
From: sb@pnet91.cts.com (Stephen Brown)
Newsgroups: comp.sys.apple2
Subject: Apple Duodisk
Message-ID: <631@generic.UUCP>
Date: 20 Apr 91 08:45:01 GMT
Sender: root@generic.UUCP
Organization: People-Net [pnet91], Etobicoke, ON
Lines: 25

I would like to connect my Apple Duodisk to my IIGS. According to the Apple
3.5 Owner's Guide, I can do this directly to the Smartport if the serial
number is less than 433754.

The serial number on my Duodisk is 42xxxx (of course).

I remember reading in an A2Central that a resistor must be cut on the analog
board to make the Duodisk work on the IIGS' Smartport. Well, I checked all the
Tech notes I have, and all the A2Centrals I have, and I couldn't find anything
more specific.

Can someone please help out and tell me which resistor(s) have to go, or where
exactly I can go to get this information.

Thanks, in advance...


+---------------------------------------------------------+
| Stephen Brown                           Toronto, Canada |
| Internet: sb@pnet91.cts.com      UUCP: utzoo!pnet91!sb  |
+---------------------------------------------------------+
| Apple II Forever !!!                                    |
+---------------------------------------------------------+
| Like my new .signature. ?    Too bad.                   |
+---------------------------------------------------------+