Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!apple!dlyons
From: dlyons@Apple.COM (David A. Lyons)
Newsgroups: comp.sys.apple2
Subject: Re: IIc+ accelerator/How to turn it on/off?
Message-ID: <51810@apple.Apple.COM>
Date: 22 Apr 91 10:01:12 GMT
References: <1991Apr21.133402.16305@news.iastate.edu>
Organization: Apple Computer Inc., Cupertino, CA
Lines: 25

In article <1991Apr21.133402.16305@news.iastate.edu> tabn9@isuvax.iastate.edu writes:
>I am wondering how I could turn the accelerator on the IIc+ on or off from
>within the program.  I know that by using OPEN APPLE/CONTROL/ESCAPE/RESET
>would turn off the accelerator, but that would restart the entire system.
>Could there be any way to do it without restarting?
>
>Tony Neyens, a student at Iowa State University
>(TABN9@CCVAX.IASTATE.EDU or TABN9@ISUVAX.BITNET) (Offer expires 5/17/91)

The information you need to control the IIc Plus accelerator is in the
Apple IIc Technical Reference, Second Edition, in one of the appendicies.
(This book is available from APDA at 1-800-282-APDA; I believe you can
get it without being an APDA member.)
You need to "unlock" the accelerator and then set it to slow mode.

I believe code was also published in a Q&A column, but I don't know what
magazine. 
-- 
David A. Lyons, Apple Computer, Inc.      |   DAL Systems
Apple II System Software Engineer         |   P.O. Box 875
America Online: Dave Lyons                |   Cupertino, CA 95015-0875
GEnie: D.LYONS2 or DAVE.LYONS         CompuServe: 72177,3233
Internet/BITNET:  dlyons@apple.com    UUCP:  ...!ames!apple!dlyons
   
My opinions are my own, not Apple's.