Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!munnari.oz.au!bruce!monu0.cc.monash.edu.au!vaxc.cc.monash.edu.au!mic119y
From: mic119y@vaxc.cc.monash.edu.au
Newsgroups: comp.sys.ibm.pc.hardware
Subject: RE: What dip switch controls the terminating resistor?
Message-ID: <1991Apr19.143707.86591@vaxc.cc.monash.edu.au>
Date: 19 Apr 91 04:37:07 GMT
Organization: Computer Centre, Monash University, Australia
Lines: 19

I tried to e-mail this but the message bounced.

In item 6347 Tony Wesley asked about the dip switch settings of a Mitsubishi
MR 535 RLL/MFM drive.

SW1 - This is the termination switch, if ALL are set ON the drive IS TERMINATED
      conversely if ALL are OFF the drive is NOT TERMINATED

SW2 - The first four switches determine the drive number (drive 1, drive2,
drive 3, drive 4). ALL these should be OFF EXCEPT for the required
corresponding drive number switch. Switch 5 if ON is "Daisy-chain" if OFF irs
"Radial" (whatever that means). Switches 6, 7 and 8 in the Tech. info. are set
to OFF.

I hope this helps.

Tony Stott, Department of Microbiology, Monash University, Clayton, 3168
Australia.
mic119y@vaxc.cc.monash.edu.au