Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!ads.com!eburns
From: eburns@ADS.COM (Edward Burns)
Newsgroups: comp.sys.next
Subject: 6040 Upgrade Problem
Message-ID: <6|7&JW^@ads.com>
Date: 19 Apr 91 23:08:26 GMT
Sender: usenet@ads.com (USENET News)
Organization: Advanced Decision Systems, Mtn. View, CA (415) 960-7300
Lines: 22

We bought two upgrade kits, and the first one went just fine.
With the second, we get this error:

Boot  sd(0,0,0)

sc:  didn't complete
sd:  target 0  lun 0  opcode 18
sd:  addr 0x43A8848  bcount 66  rdflag 1
sd:  sdstatus  0  sdstate  0  resid  66
sc:  S56  state 1  status 0x0
sc:  intrstatus 0x0  seqstep 0x0
sc:  fifo level =7  transfer count 256
sc:  command 0x3  config 0x57
sc:  dma control 0xA0  dma status  0x1

Exception #5


Since we didn't do anything different this time, I'm guessing
the board may be bad.  Any ideas?  Thanks in advance.

Ed