Path: utzoo!utgpu!cunews!bnrgate!brtph3!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: roddy@cardiac-ra.swmed.utexas.edu (Roddy McColl)
Newsgroups: comp.sys.sun
Subject: Synchronous COMMS at 56.00 kbaud - Hardware/Software reqs.
Keywords: Networks
Message-ID: <2479@brchh104.bnr.ca>
Date: 17 Apr 91 21:14:13 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 20
Approved: Sun-Spots@rice.edu
X-Original-Date: Thu, 11 Apr 91 16:25:17 CDT
X-Sun-Spots-Digest: Volume 10, Issue 66, message 16
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

This is about four enquiries rather than one, but does anyone out there
have knowledge of or experience with the following system specification:

	56 kbaud (exactly - T1 channel) synchronous comms.
	Software (along the lines of telnet or ftp) for same.

that runs on a Sun (VME-based) e.g. Sun 4-260. The actual protocol at the
Sun end of the connector can be asynchronous or synchronous, but
synchronous communications at 56 kbaud must occur in the moddle of the
"pipe", and the software must be able to support this. There are some
specs for what ultimately lies at the other end of the pipe, but assume
for now it's another Sun or UNIX box.

All replies gratefully received.

Roddy McColl                  
Radiology Imaging Ctr.      +---------------------------------+
UT Southwestern Med. Ctr.   |roddy@cardiac-ra.swmed.utexas.EDU|
Dallas TX 75235-9058        +---------------------------------+
(214) 688-2910