Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!decwrl!deccrl!news.crl.dec.com!shlump.nac.dec.com!sieras.enet.dec.com!wallis
From: wallis@sieras.enet.dec.com (Barry L. Wallis)
Newsgroups: comp.windows.ms
Subject: Re: Windows Terminal program vs. [DELETE]
Message-ID: <22218@shlump.nac.dec.com>
Date: 19 Apr 91 18:24:19 GMT
Sender: newsdaemon@shlump.nac.dec.com
Organization: Digital Equipment Corporation
Lines: 28


In article <cchapman.672064198@msd>, cchapman@msd.gatech.edu (Chuck H. Chapman) writes...
>>In <22175@shlump.nac.dec.com> wallis@sieras.enet.dec.com (Barry L. Wallis) writes:
>>..
>>..
>>..
>>>2) How can I get the function keys and keypad to emulate the PF1-4 keys and
>>>application keypad?
>> 
>>>I read the manual, but, it didn't help.
>> 
>>Didn't read far enough.  See pages 576-7 in the Windows Manual.  To make these
>>keys work press Sroll Lock.
>> 

Thanks Chuck. I can get the F1-F4 keys to work as expected. However, the
numeric keypad is only good for use of the arrow keys. How can I get the keypad
to be in keypad mode (when I am on a "real" VT100 terminal it works like this)?
For example, I turn ScrollLock on and press [F1][KP7] when in EDT (on a VAX).
This should generate the command prompt. However the [KP7] is ignored and the
next key I type is used with the [F1] key.

---
Barry L. Wallis			USENET: wallis@labc.dec.com
Database Consultant		Prodigy (don't laugh): DNMX41A
U.S. DECtp Resource Center	DECUServe: EISNER::WALLIS (not on the net yet)
Los Angeles, CA			"No one voted for me, I represent myself"
---