Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!ux1.cso.uiuc.edu!clio.sts.uiuc.edu!berger
From: berger@clio.sts.uiuc.edu (Mike Berger)
Newsgroups: comp.dcom.modems
Subject: Re: Rixon TA212A 1200/300 baud modem - how to dial (!?)
Keywords: modem rixon dialing help
Message-ID: <1991Apr24.185318.11794@ux1.cso.uiuc.edu>
Date: 24 Apr 91 18:53:18 GMT
References: <1991Apr24.150926.7884@cs.dal.ca>
Sender: usenet@ux1.cso.uiuc.edu (News)
Distribution: na
Organization: University of Illinois at Urbana
Lines: 23

erin@ug.cs.dal.ca (Erin MacNeil) writes:


>	Hi, I have an old Rixon 1200/300 baud modem here, and a question,
>	how do I make it dial :-). I've tried the AT command set, with no
>	success. Does anyone know the command set for this modem? (modem
>	details to follow). Any pointers would be appreciated, Thanks.

>	RIXON TA212A
>	P/N   905-5123-001
*----
It's easy!  Just dial the number on the phone, and press the on-line switch
for about 3/4 second.  I assume you have an M13F cable and appropriately
wired dataphone, or the single-line phone interface cable that came with
the modem.  If you need to wire one yourself, I believe that pin 7 is Tip,
8 is Ring, and 5 and 15 get a N.O. momentary contact pushbutton wired
between them, but that's from memory and may not be correct.

--
	Mike Berger
	Department of Statistics, University of Illinois
	AT&TNET     217-244-6067
	Internet    berger@atropa.stat.uiuc.edu