Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!pacbell.com!tandem!zorch!vsi1!teda!netcom!gandrews
From: gandrews@netcom.COM (Greg Andrews)
Newsgroups: comp.dcom.modems
Subject: Re: T2500 hangs up right after connection
Summary: Tried turning off error correction?
Message-ID: <1991Apr25.040327.11273@netcom.COM>
Date: 25 Apr 91 04:03:27 GMT
References: <958@spool.mu.edu>
Organization: Netcom - Online Communication Services  UNIX System {408 241-9760 guest}
Lines: 23

In article <958@spool.mu.edu> tomb@marque.mu.edu (Tom Baas) writes:
>
>In trying to call another system with ny Telebit T2500 at 2400bps.
>I get a connection to the point where I get the modem message:
>
>CONNECT 2400
>
>But immediatly thereafter it gets hung up.  I am sure that the basic
>modem settings are correct and if I were to call different systems
>at 2400 bps, the connection is fine.
>

Does the other modem have error correction enabled?  If not (or you're
not certain), then try turning off error correction in your T2500.

Either S95=0 S97=0 S107=0, or &Q0 should do the trick, depending on
whether you use the Enhanced Command mode or Conventional Command mode.

-- 
.------------------------------------------------------------------------.
|  Greg Andrews   |       UUCP: {apple,amdahl,claris}!netcom!gandrews    |
|                 |   Internet: gandrews@netcom.COM                      |
`------------------------------------------------------------------------'