Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!elroy.jpl.nasa.gov!mahendo!wlbr!europa.asd.contel.com!wraith.netops.contel.com!powell
From: powell@wraith.netops.contel.com (Mike Powell "CFS Net Ops")
Newsgroups: comp.dcom.modems
Subject: Re: T2500 hangs up right after connection
Message-ID: <1991Apr28.155539.14154@europa.asd.contel.com>
Date: 28 Apr 91 15:55:39 GMT
References: <958@spool.mu.edu>
Sender: news@europa.asd.contel.com (News)
Organization: Contel Federal Systems (Telecom)
Lines: 36
To: uunet!lakesys!tbaas!tom
Nntp-Posting-Host: wraith.netops.contel.com

In article <958@spool.mu.edu> tomb@marque.mu.edu (Tom Baas) writes:
>I have a problem that I wonder if anyone can help me out with.
>
>In trying to call another system with ny Telebit T2500 at 2400bps.
>I get a connection to the point where I get the modem message:
>
>CONNECT 2400
>
>But immediatly thereafter it gets hung up.  I am sure that the basic
>modem settings are correct and if I were to call different systems
>at 2400 bps, the connection is fine.
>
>I notice that the third sound comming from the modem lasts a little long.
>(first the host responds, them mine responds, then they both acknowledge
>proper speed(?))  But this also happens when I call the other sites which
>are successful.
>
>Any Ideas?
>
>Thanks in advance.
>-- 
>I can accept e-mail and Voice-mail at:
>..lakesys!tbaas!tom      or   tom\@tbaas         or      tbaas.lakesys.com!tom
>or Voice at: 1-414-377-4038

You are probably reaching the maximum time allowed for the modems to
connect. time it and check the value of register 7. if they are close
bump up the value in register 7 (Wait for carrier time).

hope this helps.
Mike
--
Mike Powell PPASEL
"It's hard to find router bits for your cisco." MRP 03/29/91
Disclaimer: I speak for myself. No direct relation to the DUAT folks.
internet: powell@wraith.netops.contel.com  Usenet: uunet!contel-fss!powell