Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uunet!jhereg!andrew
From: andrew@jhereg.osa.com (Andrew C. Esh)
Newsgroups: comp.dcom.sys.cisco
Subject: Re: mib.txt
Message-ID: <1991Apr24.142758.24423@jhereg.osa.com>
Date: 24 Apr 91 14:27:58 GMT
References: <34459@boulder.Colorado.EDU>
Organization: Open Systems Architects, Inc., Mpls, MN
Lines: 25

In article <34459@boulder.Colorado.EDU> jjamison@mwunix.mitre.org (John H. Jamison) writes:
>Dear Colleagues,
>
>	I have a copy of mib.txt from ftp.cisco.com. I have started to use it
>with the CMU snmp tool set. In order to add the entrys in cisco's mib.txt file 
>to the CMU mib.txt file it is necessary to do a lot of editing. cisco says they
>are working on it but do not have a CMU snmp compatible mib.txt file ready yet. 
>Has anyone out there modified cisco's mib.txt file to work with CMU snmp tools?
>If so I would really appreciate the chance to get a copy of it.
>
>
>			- Thanks
>
>			John Jamison
>			jjamison@mitre.org

Part of the problem seems to be that CMU SNMP looks as though it is MIB-I,
while most of the mib files I have been able to obtain are MIB-II. The
problems start when CMU-SNMP runs across the definitions for things like
DisplayString, which are not defined in MIB-I. CMU has to update.
-- 
Andrew C. Esh			andrew@osa.com
Open Systems Architects, Inc.
Mpls, MN 55416-1528		Punch down, turn around, do a little crimpin'
(612) 525-0000			Punch down, turn around, plug it in and go ...