Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!dev0.mdcbbs.com!pirk
From: pirk@dev0.mdcbbs.com
Newsgroups: comp.music
Subject: Re: Seeking technical info. for MPU-401
Message-ID: <1991Apr25.091731.1@dev0.mdcbbs.com>
Date: 25 Apr 91 09:17:31 GMT
References: <13037.280ebb86@zeus.unomaha.edu>
Organization: McDonnell Douglas M&E, Cypress CA
Lines: 27
Nntp-Posting-Host: dev0
Nntp-Posting-User: pirk

In article <13037.280ebb86@zeus.unomaha.edu>, stanw@zeus.unomaha.edu writes:
> Can anyone point me at an FTP site that has documentation on the Roland
> MPU 401 (or its other incarnations) and/or examples of coding (not music,
> but code that accesses the board at the I/O port level)? I don't have
> the technical reference manual...
> 
> Stan Wileman, stanw@zeus.unomaha.edu
-- 
	I in-advertantly replied to this and then realised it would not post,
only send to the author.  I don't know of a ftp for midi, but if you need good
specs along with software, check with Music Quest.  They sell a programmers
toolkit for the MQX series and other MPU 401 compatable I/F's that comes with
the full MPU spec. and cotains 'C' callable subroutines that can do the low
level I/O for you (ie: all the stuff needed to write own sequencer). Music
Quest can be reached at (800) 876-1376.

sp

 
.Steve Pirk.......midit.....Voice: (714) 952-5516.........................
..McDonnell Douglas M&E..Internet: pirk@dev0.mdcbbs.com...................
...5701 Katella Ave..........UUCP: uunet!mdcbbs!dev0.mdcbbs!pirk..........
....Cypress, CA. 90630........PSI: PSI%31060099980019::DEV0::PIRK.........
--------------------------------------------------------------------------
"The opinions expressed herein, are probably not those of MDC, and I'm not
 sure if I can even call them mine......."