Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!cs.utexas.edu!lgc.com!mips.mitek.com!convex!mic!letni!utacfd!merch!cpe!adaptex!adaptx1!neese
From: neese@adaptx1.UUCP
Newsgroups: comp.periphs.scsi
Subject: Re: Xenix 3.2.1 and HP DAT tape - does
Message-ID: <283400100@adaptx1>
Date: 27 Apr 91 01:59:15 GMT
References: <28850@nestroy.wu-wien.ac.at>
Lines: 18
Nf-ID: #R:nestroy.wu-wien.ac.at:28850:adaptx1:283400100:000:727
Nf-From: adaptx1.UUCP!neese    Apr 26 09:37:00 1991


>/* ---------- "Xenix 3.2.1 and HP DAT tape - does" ---------- */
>I face the following Situation: lots of Xenix 3.2.1/386 machines in the field.
>Disks are Seagate/CDC 94-181 with various SCSI controllers like Adaptec, 
>Future Domain and WD.
>
>Does anybody have experience hooking up HP35450A DAT tapes to these
>combinations? Does that work, or is it a no-no?

I have used the HP DAT under SCO XENIX 2.2.2GT w/xnx255 (SCSI driver) on
the AHA152B (Adaptec) board without problems.  I have also used the WangDAT,
and Archive Python in the same operating environments without any troubles.


			Roy Neese
			Adaptec Senior SCSI Applications Engineer
			UUCP @  neese@adaptex
				uunet!cs.utexas.edu!utacfd!merch!adaptex!neese