Path: utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!apple!tahoe!jimi!arrakis!sivesh
From: sivesh@nevada.edu (SIVESH PRADHAAN)
Newsgroups: comp.protocols.tcp-ip
Subject: Re: help! problem making IBM RISC-6000 work with AIX/TCP-IP
Message-ID: <1991Apr26.183623.1169@nevada.edu>
Date: 26 Apr 91 18:36:23 GMT
References: <3231@oucsace.cs.OHIOU.EDU>
Sender: news@nevada.edu (News Administrator)
Organization: University of Nevada, System Computing Services
Lines: 16

Hi,

	I had the same exact problem. I am not sure which of the following
things solved it :-).

	1. Check to see if you have chosen the right Ethernet Adapter. You
	   can do this through smit-devices-comm-ethernet adapter-adapter-
	   change/show. If you have thick net you should have en0 configured
	   and have dix as the adapter/ for thin net ent0 and bnc.

	2. Try rebooting the system.

	3. If you have a domainserver then check to see if resolv.conf file in
	   /etc is ok.

	Hope this solves your problem.