Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!sunic!news.funet.fi!polaris.utu.fi!polaris!sutela From: sutela@polaris.utu.fi (Kari Sutela) Newsgroups: comp.sys.amiga.misc Subject: Re: More on A3000 Message-ID: Date: 26 Apr 91 12:47:40 GMT References: <1991Apr25.152150.5637@bronze.ucs.indiana.edu> <1991Apr25.183325.8806@cs.cornell.edu> Organization: University of Turku, Finland Lines: 22 johnhlee@CS.Cornell.EDU (John H. Lee) writes: >In article <1991Apr25.152150.5637@bronze.ucs.indiana.edu> tagreen@lothario.ucs.indiana.edu (Todd Green) writes: >>[about problems with ScreenMode preferences tool] >The ScreenSize preferences tool for a virtual workbench works fine on my >A3000. Just be sure to hit return when you have entered the screensize parameter in the string gadget. At least on my 2.01, I can do the following: 1. Select the width string gadget with the mouse 2. Enter a value into it without hitting return 3. Select the height string gadget with the mouse Now the width value displayed in the gadget is the same which I entered, *but* the default width will *not* be changed. You can tell by looking at the default check mark right next to the string gadgets. This `feature' might be fixed in 2.02. -- Kari Sutela sutela@polaris.utu.fi