Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!cs.utexas.edu!uunet!timbuk!marc
From: marc@sequoia.cray.com (Marc Bouron)
Newsgroups: comp.sys.atari.st
Subject: Re: Can GCC treat printer like file?
Keywords: gcc
Message-ID: <032649.21988@timbuk.cray.com>
Date: 26 Apr 91 09:02:45 GMT
References: <1991Apr19.200801.26887@ux1.cso.uiuc.edu> <032147.3514@timbuk.cray.com> <1991Apr26.044146.19629@watmath.waterloo.edu>
Reply-To: marc@sequoia.cray.com (Marc Bouron)
Organization: Cray Research, Inc.
Lines: 29


In article <1991Apr26.044146.19629@watmath.waterloo.edu>, ljdickey@watmath.waterloo.edu (L.J.Dickey) writes:
|> In article <032147.3514@timbuk.cray.com> marc@sequoia.cray.com
|> 	(Me!! :-) ) writes:
|> >
|> >In article <1991Apr19.200801.26887@ux1.cso.uiuc.edu>, timothyg@ncsa.uiuc.edu
|> 	(Timothy Gallivan) writes:
|>  > ...
|>  > There is a standard filename called `PRN:' or `LST:' that you should be
|>  > able to use just like any other filename.  TOS recognises this filename
|>  > and directs the output to the printer.  For example, you would write
|>  > fopen("LST:","w").  You'll need to check yourself which one works...
|>  > one is standard TOS - the other was a Lattice special.
|> 
|> 
|> Is there a standard filename for the serial port?

Try "AUX:".  Also, "CON:" for the console.

[M][a][r][c]


################################################################################
#                           #  marc@sequoia.cray.com           #     .   .     #
#  Marc CR Bouron           #  M.Bouron@cray.co.uk     (ARPA)  #    _|\ /|_    #
#  Cray Research (UK) Ltd.  #  M.Bouron@crayuk.uucp  (DOMAIN)  #   (_|_V_|_)   #
#  +44 344 485971 x2208     #  M.Bouron@uk.co.cray    (JANET)  #     |   |     #
#                           #  ...!ukc!crayuk!M.Bouron (UUCP)  #               #
################################################################################