Newsgroups: comp.sys.hp
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!news
From: ishii@hpuxa.ircc.ohio-state.edu (Kosuke Ishii)
Subject: Switch settings for Paintjet
Message-ID: <1991Apr24.212346.947@magnus.acs.ohio-state.edu>
Originator: ishii@hpuxa.acs.ohio-state.edu
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: hpuxa.acs.ohio-state.edu
Organization: The Ohio State University
Distribution: usa
Date: Wed, 24 Apr 1991 21:23:46 GMT
Lines: 26


I have a Paintjet (model 3630A) with an HP-IB interface
that need to hook up to a Mac through a serial/IEEE488
converter.  The manual I have doesn't explain the switch
settings on the Paintjet.  I need to know how to set:

    - baud
    - stop bits
    - address
    - parity

My switches look like:

          _______
          | 1 0 | A1
          | 1 0 | A2
          | 1 0 | A3
          | 1 0 | norm
          | 1 0 | 
          | 1 0 | PC8
          | 1 0 | ENG
          |_____|


If anyone has a table of switch settings they could post or
e-mail me I would really appreciate it.