Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!samsung!uunet!dkwgate!einstein.dkw.com!jr
From: jr@einstein.dkw.com (J.R. Jesson)
Newsgroups: comp.sys.hp
Subject: Probs w/ 9000/800 Serial Lines
Message-ID: <1991Apr26.195408.659@dkwgate.uucp>
Date: 26 Apr 91 19:54:08 GMT
Sender: news@dkwgate.uucp (NewsSoftware)
Organization: DKW Systems Corporation
Lines: 25
Originator: jr@einstein.dkw.com

I have an hp9000/822 with a HP-PB 8 Line mux (HP 40299A).  I'm
having trouble setting up the mux device so that it will recognize
when my telebit trailblazer modem has lost carrier - so that it will
then hang up the interactive session.  I've wired a "CCITT" modem
cable as suggested in the documentation on the mux and I've configured
the tty0px device in both simple and ccitt mode, with the dial-out or
dial-in attribute set; in short I've tried everything I know to do.  
I would appreciate any input on this problem; the HP machine is not
supposed to be my main worry.  

J.R.

-------------------------------------------------------------------------------
DKW  Systems Corporation
4050 INFOMART
1950 Stemmons Freeway,
Dallas, Tx 75207
(214) 517-0576
	       "Unix?  We don't need no stinkin' Unix!"
-------------------------------------------------------------------------------
-- 
-------------------------------------------------------------------------------
DKW  Systems Corporation
4050 INFOMART
1950 Stemmons Freeway,