Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!think.com!snorkelwacker.mit.edu!ira.uka.de!fauern!NewsServ!reseq!regent.e-technik.tu-muenchen.de!hns
From: hns@regent.e-technik.tu-muenchen.dbp.de (Henning Spruth)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: problem: ET4000/1024x768/Win3/enhanced 386
Message-ID: <hns.672561527@regent.e-technik.tu-muenchen.de>
Date: 25 Apr 91 06:38:47 GMT
Sender: news@reseq.regent.e-technik.tu-muenchen.de
Lines: 20

I am using the following configuration:

- 25 Mhz 80386 clone
- ET 4000 super VGA card w/1 MB RAM, called the 'VGA/8514AX2'
- 120 MB WREN III w/Adaptec 2320 Controller
- HIMEM.SYS/EMM386.SYS/SMARTDRIVE.SYS

When I set up Windows for 1024x768x16 or 1024x768x256, the monitor
goes out of sync when I start Windows. If I execute Windows in 
standard mode ('win -s'), everything is fine. The other resolutions, 
e.g. 800x600x256, work o.k. in both standard and enhanced 386 mode.

I have tried various windows drivers for the ET4000 (the one supplied
with the VGA card and two from cica.cica.indiana.edu) and keep
getting these effects with all of them.

Any help would be greatly appreciated.

-
Henning Spruth <--> hns@regent.e-technik.tu-muenchen.de