Xref: utzoo comp.sys.ibm.pc.hardware:8048 comp.sys.ibm.pc.misc:9031
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!ispd-newsserver!kodak!uupsi!rodan.acs.syr.edu!pszemkow
From: pszemkow@rodan.acs.syr.edu (Paul Szemkow)
Subject: Repost: WD1007 ESDI controller to IBM 70 MB Drive
Message-ID: <1991Apr25.131309.11587@rodan.acs.syr.edu>
Organization: Syracuse University, Syracuse, NY
References: <1991Apr12.101152.10034@rodan.acs.syr.edu>
Distribution: na
Date: Thu, 25 Apr 91 13:13:09 GMT

In article <1991Apr12.101152.10034@rodan.acs.syr.edu> pszemkow@rodan.acs.syr.edu (Paul Szemkow) writes:
>Western Digitall
>Fax 714 863 1656 ?????
>
>
>I am trying to connect a Western Digital ESDI controller (WD1007v) to an
>IBM 70MB Extended ESDI Fixed Disk Drive (#3988 type 0667).  The computer is a
>TOP-286 with an 286-BIOS(c) 1987 AMI with a ROM BIOS date of 03-03-89.  The
>controller works with both floppy drives but does not recognize the fixed
>disk at all.  With WDFMT Rev 2.10 I get an Error with "Status 11 Error 4".
>With EasyDiag I get "Status = 51 Check Error Register, and Error = 4 Abort
>Command".  I am running with a 150 Watt power supply and power is going to the
>fixed drive.  The ESDI controller's jumpers are set at:
>          W7: 1-2
>	  W1: none
>	  W3: none
>	  W12: none
>	  W6: none
>	  W8: 2-3
>	  W5: none
>	  
>There are two ROMs with the following IDs:
>	62 000318-031 WDC '89
>	62 000271-061 WDC '89
>
>Any ideas on how to get the controller to recognize the fixed drive?
>
>Thanks 
>
>Paul Szemkow