Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!mips!daver!bungi.com!news From: texsun!vector.dallas.tx.us!maniac@convex.convex.com Newsgroups: comp.sys.nsc.32k Subject: Re: ET532 Message-ID: Date: 26 Apr 91 02:22:05 GMT References: <<9104241611.AA27803@wombat.bungi.COM>> Sender: news@daver.bungi.com Lines: 20 Approved: news@daver.bungi.com George Scolaro writes: [description of the ETH532 deleted...] > The board is designed and routed. It has never been built. All that is > required is a reasonable number of people to want it (reduce the PCB NRE etc) > and it is ready to fab. The design is based upon the PC532 and an ethernet > design I've already done - so even though it would be a prototype run I have > very high confidence in the design. Maybe a cut and jump or two though... Sounds good, did the original pc532 board come out this good? (i.e. did my board from the second round have any changes on it, or was it identical to everyone elses?) Anyway, count me in for a board. I'm not sure I'll have the money for a month or two, but I should be able to come up with two or three hundred bucks for one. -- Jon Buller jonb@vector.dallas.tx.us ..!texsun!vector!jonb FROM Fortune IMPORT Quote; FROM Lawyers IMPORT Disclaimer;