Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!mips!daver!bungi.com!news
From: george@wombat.bungi.COM (George Scolaro)
Newsgroups: comp.sys.nsc.32k
Subject: Re: ET532
Message-ID: <9104260809.AA29939@wombat.bungi.COM>
Date: 26 Apr 91 15:09:08 GMT
Sender: news@daver.bungi.com
Lines: 24
Approved: news@daver.bungi.com

[In the message entitled "Re: ET532" on Apr 25, 21:22, texsun!vector.dallas.tx.us!maniac@convex.convex.com () writes:]
> 
> George Scolaro writes:
> > The board is designed and routed. It has never been built. All that is
> 
> Sounds good, did the original pc532 board come out this good?  (i.e. did
> my board from the second round have any changes on it, or was it identical
> to everyone elses?)

All boards that have ever been shipped are identical and no PAL changes have
even been made (only the PCB house date codes changed). In fact the original
prototype only had a couple of wires - and one of those was due to
misinformation from an NS person regarding a subtle timing parameter - pays
to only design based on the data sheet!!

Of the last half a dozen boards I've done the reworks required have been
either a wire or two, pal changes or perfect - so I'm banking on a major
scewup anytime now :-)

best regards,

-- 
George Scolaro
george@wombat.bungi.com                [37 20 51 N / 122 03 07 W]