Path: utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: flanagan@lisbon.stat.washington.edu (Jim Flanagan)
Newsgroups: comp.sys.sun
Subject: SLC SCSI problems
Keywords: Hardware
Message-ID: <2586@brchh104.bnr.ca>
Date: 24 Apr 91 00:00:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 31
Approved: Sun-Spots@rice.edu
X-Original-Date: Mon, 22 Apr 1991 22:13:18 GMT
X-Sun-Spots-Digest: Volume 10, Issue 85, message 18
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

I am having the following problems on a SPARC SLC with a QUANTUM207 hard
drive at SCSI target 3. I am running 4.1.1b (until the machine crashes.)

Apr 18 14:48:38 sverige vmunix: esp0: Spurious data in phase from target 3
Apr 18 14:48:38 sverige vmunix:
Apr 18 14:48:38 sverige vmunix: esp0:   Target 3 now Synchronous at 4.0 mb/s max

  And

pr 20 01:51:13 sverige vmunix: esp0:   failed reselection
Apr 20 01:51:13 sverige vmunix:         State=RESEL Last State=FREE
Apr 20 01:51:13 sverige vmunix:         Latched stat=0x17<XZERO,MSG,CD,IO> intr=
0xc<FCMP,RESEL> fifo 0x1
Apr 20 01:51:13 sverige vmunix:         last msg out: <unknown msg 0xff>; last m
sg in: DISCONNECT
Apr 20 01:51:13 sverige vmunix:         DMA csr=0x80000000
Apr 20 01:51:13 sverige vmunix:         addr=ff06e000 last=ff06c000 last_count=2
000
Apr 20 01:51:13 sverige vmunix: sd0:    SCSI transport failed: reason 'reset': r
etrying command
Apr 20 01:51:13 sverige vmunix: esp0:   Target 3 now Synchronous at 4.0 mb/s max
 transmit rate

Any clues? Looks like the SCSI controller is bad? What do I send back, the
SLC or the external disk pack?

Jim Flanagan			#ifdef OFFENSIVE
flanagan@stat.washington.edu	static char disclaimer[] = NULL;
System Programmer		#endif
UofW Statistics			main(){while(fork());} /* terminate account */