Path: utzoo!utgpu!cunews!bnrgate!brchh104!brchs1!bnr.ca!rice.edu!sun-spots-request
From: horke@buchonia.rhoen.in-berlin.de
Newsgroups: comp.sys.sun
Subject: Getbyte error on Tape-Boot
Keywords: Miscellaneous
Message-ID: <2679@brchh104.bnr.ca>
Date: 28 Apr 91 19:20:00 GMT
Sender: news@brchh104.bnr.ca
Organization: Sun-Spots
Lines: 17
Approved: Sun-Spots@rice.edu
X-Original-Date: Fri, 26 Apr 91 1:04:44 MET DST
X-Sun-Spots-Digest: Volume 10, Issue 91, message 19
X-Note: Submissions: sun-spots@rice.edu, Admin: sun-spots-request@rice.edu

I wanted to boot Sun OS from tape with an Archive-Streamer (2150S) to a
3/50, but there is an error when I try to boot st(0,0,0) :

st: error, sense key = 5 error = 0
getbyte error, target never set REQ
getbyte error, phase mismatch
invalid status msg = FFFFFFFF
st: error, sense key = 6 erroro = 0

Nearly the same error occurs, when I forgot to install the resistors on
the HD, but the Tape works okay if the OS is bootet via HD.

 Can somebody help me ?

Bernhard Kroenung, Bahnhofstr. 8, D-W6408 Ebersburg/Rhoen, Germany +49 6656 386
horke@buchonia.rhoen.in-berlin.de    X.400 : kronung@jlug-gw.uni-giessen.dbp.de