Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!usc!apple!mips!atha!aunro!ukma!usenet.ins.cwru.edu!po.CWRU.Edu!axa12
From: axa12@po.CWRU.Edu (Ashok Aiyar)
Newsgroups: comp.graphics
Subject: printing TIFF images on a HP Laserjet II
Message-ID: <1991May3.050304.22101@usenet.ins.cwru.edu>
Date: 3 May 91 05:03:04 GMT
Sender: news@usenet.ins.cwru.edu
Organization: Case Western Reserve University, Cleveland, Ohio, (USA)
Lines: 32
Nntp-Posting-Host: cwns6.ins.cwru.edu



Hello:

I have stored a number of my experimental results as TIFF images.
THey have been scanned and stored in 64 shades of gray.
I would like to print them out on my HP LaserJet II.  My software
and hardware specifications are as follows:

Hardware:
386 with 4 megs RAM
HP LaserJet II with 1.5 megs RAM

Software:
Image Alchemy
PicLab

So far I have been converting the TIFF images to GIF images using
alchemy and then printing them our using PicLab.  While the output
is reasonably good, it is not outstanding.
I would like to have any opinions, and information on printing
software that would allow for dithering to simulate more shades of
gray in the printout.

Thank you,

Ashok
-- 
Ashok Aiyar
axa12@po.cwru.edu
aiyar@cwbio.bioc.cwru.edu