Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uwm.edu!linac!att!cbnewsm!cbnewsk!brankin
From: brankin@cbnewsk.att.com (william.t.rankin)
Newsgroups: comp.periphs.scsi
Subject: Re: internal scsi terminators?
Keywords: scsi terminators dataMate
Message-ID: <1991May3.120134.26459@cbnewsk.att.com>
Date: 3 May 91 12:01:34 GMT
References: <2955@randvax.UUCP>
Distribution: na
Organization: AT&T Bell Laboratories
Lines: 22

In article <2955@randvax.UUCP> guyton@randvax.UUCP (Jim Guyton) writes:

>I'm in the market for more than a few *internal* scsi terminators.

>Pls note that I'm looking for something that will plug into the
>scsi ribbon cable port, not resistor packs or external terminators.

Me too, but I'd like some directions on how to build a terminator
plug given, say, a 50-pin centronics port.  Actually, the format
of the connector is not important, just give me it in terms of
pins.

Anyone built such a beast?

>Thanks much,
>
>-- Jim Guyton

thanx, also.

-bill rankin
wtr@bromo.att.com