Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!njin!paul.rutgers.edu!aramis.rutgers.edu!dimacs.rutgers.edu!mips!samsung!uunet!comp.vuw.ac.nz!am.dsir.govt.nz!marcamd!mercury!kcbbs!kc
From: the_nurumanncer@kcbbs.gen.nz (Phillip Hardy)
Newsgroups: comp.sys.amiga.datacomm
Subject: Ncomm bugs
Message-ID: <1991May2.100858.13992@kcbbs.gen.nz>
Date: 2 May 91 10:08:58 GMT
Lines: 14
Organisation: Kappa Crucis Unix BBS, Auckland, New Zealand

RE: Mcomm 1.92 crashing when the NCOMM: is not ASSIGNED.
I do NOT have that problem it runs well without NCOMM: assigned.
I also did not set up a Disk named NCOMM so when i ran Ncomm it starts 
ok.. then when i try say to exit or Dial it then asks for Volume Ncomm:
IS it possable you have not copyed the new fonts? or not installed Req.libary?
 i have a Partition on my Hard Drive called Ncomm and all is Happy.
I own an Amiga B2000HD MB Rev 4.3 With Half Meg Chip and Half Meg Fast. 
Ram, Also i am running a Penrill V32 Modem and all is Fine.
i have set Pri to 1. and this has Improved my Modeming Speed.
 
Hope this info has helped you... 

Phillip hardy,   E-Mail to : phillip_hardy@kcbbs.gen.nz
Yep New Zealand.. Auckland City, Earth..... (Peace Ruzz OK)