Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!postmod!andrew
From: andrew@postmod.NASHUA.NH.US (Andrew J. Richardson)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Pacific Peripherals Problems.
Message-ID: <19151085.ARN0c43@postmod.NASHUA.NH.US>
Date: 3 May 91 15:54:45 GMT
References: <71Za23w164w@undrground.UUCP>
Reply-To: andrew@postmod.NASHUA.NH.US
Followup-To: comp.sys.amiga.hardware
Distribution: usa
Organization: fredd's Famous Computers
Lines: 22

In article <71Za23w164w@undrground.UUCP>, Mark Gardner writes:

--> I have a Paciphic Peripherals SubSystem 500, a box that fits under the 
--> Amiga 500, connects to the side expansion bus (with pass-through 
--> available), and allows one to connect two Zorro II cards.  I'd like to 
--> use it to connect my Amiga A2090A hard drive controller and my Quantum 
--> 52meg SCSI 3.5" quarter-height drive.  There are a few problems I see 
--> right now, though.
-->  
--> 1) Although the socket for the SCSI cable on the drive has a connector to 
--> make sure that the cable can only plug in one way, the SCSI connector on 
--> the controller has no such thing.  How can I tell which way I should plug 
--> the cable into the controller?

   the cable should have a stripe on lead #1, and the board has a number "1"
on it next to pin 1.  put the two together.


---andrew

andrew@postmod.NASHUA.NH.US
uunet!postmod!andrew