Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!mcsun!ukc!strath-cs!glasgow!wilsona From: wilsona@dcs.glasgow.ac.uk (Alan Wilson) Newsgroups: comp.sys.atari.st Subject: Re: DESKJET printer drivers Message-ID: <1991May2.132713.5413@dcs.glasgow.ac.uk> Date: 2 May 91 13:27:13 GMT References: <41919@ucbvax.BERKELEY.EDU> <1991Apr29.180427.25671@cs.ucla.edu> Organization: Computing Sci, Glasgow Univ, Scotland Lines: 16 Whilst on the subject of printer drivers in general, could someone post details of the 'printer.sys' file most commonly found referred to in the 'assign.sys' with driver ID 21 ? I have a printer which emulates an Epson, but most Epson drivers do not use the quadruple density graphics mode which my printer has. I have tried hacking the printer.sys file... I can get the printer into the correct mode, but the driver only sends enough data for 960 dots per inch, whilst I want 1920. A posting of this files structure would be of great help to me - output from timeworks is really horrible, I'm sure my printer can do better. Alan Wilson -- ############################################################################### # /\ / Alan # USEnet : wilsona!glasgow!mcsun!... #