Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!crdgw1!uunet!mcsun!ukc!strath-cs!glasgow!wilsona
From: wilsona@.glasgow.ac.uk (Alan Wilson)
Newsgroups: comp.sys.atari.st.tech
Subject: 'GDOS printer drivers'
Message-ID: <1991May2.133527.5895@dcs.glasgow.ac.uk>
Date: 2 May 91 13:35:27 GMT
Sender: wilsona@dcs.glasgow.ac.uk (Alan Wilson)
Organization: Computing Sci, Glasgow Univ, Scotland
Lines: 27

Newsgroups: comp.sys.atari.st
Subject: Re: DESKJET printer drivers
Summary: 
Expires: 
References: <D'B_66~@warwick.ac.uk> <41919@ucbvax.BERKELEY.EDU> <1991Apr29.180427.25671@cs.ucla.edu>
Sender: 
Followup-To: 
Distribution: 
Organization: Computing Sci, Glasgow Univ, Scotland
Keywords: 

Whilst on the subject of printer drivers in general, could someone post
details of the 'printer.sys' file most commonly found referred to in the 'assign.sys' with driver ID 21 ? I have a printer which emulates an Epson, but most
Epson drivers do not use the quadruple density graphics mode which my printer
has. I have tried hacking the printer.sys file... I can get the printer into the
correct mode, but the driver only sends enough data for 960 dots per inch, 
whilst I want 1920. A posting of this files structure would be of great help
to me - output from timeworks is really horrible, I'm sure my printer can do better.

Alan Wilson


-- 


###############################################################################
#  /\        / Alan   # USEnet :  wilsona!glasgow!mcsun!...                   #