Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!zaphod.mps.ohio-state.edu!wuarchive!uunet!aurs01!luce
From: luce@aurs01.UUCP (J. Luce)
Newsgroups: comp.sys.cbm
Subject: QuickSilver 128
Message-ID: <59771@aurs01.UUCP>
Date: 29 Apr 91 20:13:06 GMT
Sender: news@aurs01.UUCP
Reply-To: luce@aurw46.UUCP (J. Luce)
Distribution: usa
Organization: Alcatel Network Systems, Raleigh NC
Lines: 21

I just purchased a used SFD1001 and a Quicksiver 128 IEEE interface. Can
anyone tell me what the dipswitch settings are on the 4-switch DIP? All
I know is that as it now sits, the SFD1001 is seen as Device 8.

Also, there is 1 barnacle underneath and the a wired 'clip' to one of
the pins at the female end of the cartridge port extender. What is that
for and does it affect the 64 or 128 usage?

I also understand that there was software that came with it originally.
Anyone got the disk?

Thanks.


-------------------------------------------------------------------
John Luce               | Life is the leading cause of death
Alcatel Network Systems | -----------------------------------------
Raleigh, NC             | Standard Disclaimer Applies
919-850-6787            | Mail? Here? Try aurs01!aurw46!luce@mcnc.org
                        |        or ...!mcnc!aurgate!luce
-------------------------------- or John.Luce@f130.n151.z1.fidonet.org