Newsgroups: comp.sys.cbm
Path: utzoo!utgpu!news-server.csri.toronto.edu!rpi!uupsi!rodan.acs.syr.edu!rjkopp
From: rjkopp@rodan.acs.syr.edu (Ray Kopp)
Subject: Appendum to last note
Message-ID: <1991May1.152840.28469@rodan.acs.syr.edu>
Sender: rjkopp@rodan.acs.syr.edu (Ray Kopp)
Organization: Syracuse University, Syracuse, NY
Distribution: usa
Date: Wed, 1 May 91 15:28:40 GMT

My appologies, I got called out of the office and mistakenly sent it before I
finished.  
 
 Once again pin out is as follows With Descriptions.
   
   3     1
    5   4
      2

      Pin 1- Luminance
      Pin 2- Ground
      Pin 3- Audio Out
      Pin 4- Video Out
      Pin 5- Audio In
       
       For Audio out you should connect Ground to Ground or outside of RCA plug
       Pin 3 to Post of RCA Plug.
	 
	 This does not interfere with display on TV.             
	 If you are using a Monitor that uses this socket I don't really know
	 how to do that unless you solder dual wires to pin 2 and 3.
	   
	   Ray Kopp
	   rjkopp@suvm.acs.syr.edu